Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer - Aix-Marseille Université Access content directly
Journal Articles Precision Engineering Year : 2014

Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer

Abstract

This paper deals with the accuracy of compensation of machine tools using a tracking interferometer using the multilateration method. The measurement strategy and thermal drift compensation of the measurements are studied. It shows that most effects of temperature are accurately compensated by the laser tracking interferometer software. However, thermal drifts of accessories are not taken into account, and are therefore not corrected. To validate the robustness of procedures, the geometrical errors of the same machine tool were measured by five measurement strategies using the same equipment. Each strategy is devised and carried out independently by a different person from several institutions. For each strategy, the geometrical compensations were applied to a set of nominal tool path points. The difference, between the nominal points and the compensated or uncompensated points was calculated. This criterion was used to discuss the procedures employed by the participants.
Fichier principal
Vignette du fichier
Linares_33_Laser Tracer Comparison_avril_2014.pdf (948.04 Ko) Télécharger le fichier
Origin : Files produced by the author(s)

Dates and versions

hal-01440809 , version 1 (19-01-2017)

Identifiers

Cite

Jean-Marc Linares, Julien Chaves-Jacob, Heinrich Schwenke, Andrew Longstaff, Simon Fletcher, et al.. Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer. Precision Engineering, 2014, 38, pp.578 - 588. ⟨10.1016/j.precisioneng.2014.02.008⟩. ⟨hal-01440809⟩
244 View
1512 Download

Altmetric

Share

Gmail Facebook X LinkedIn More